原装hbe N-EUPEX DS 315标准弹性联轴器

   具较佳防水性，易散热及运转效率高；◆模块化组合使传动比范围拓展至：i=1～1。●减速器速比范围[i]4.86～202.5；●输出扭矩0～388[Nm]；◆精密加工的硬齿面传动齿轮，变形小，精度高，平稳运转,噪音低，能适应在恶劣环境中长期连续工作；◆输出轴直径分为ФФФФФФ50六种规格；◆两级或三级传动，速比范围大，每单个机座具有从1到1的14种减速比；◆采用优质轴承，延长使用寿命；产品优势G系列减速电机箱体采用铝合金(机型G18/G22/G28)和铸铁(机型G32/G40/G50)，外型美观，分为底脚安装和法兰安装两种机座，适应全方位的安装；◆高强度合金材料的斜齿轮，结构更紧凑，箱体体积更小。

      To maximize the design value of the inner and outer teeth of the coupling has ensured the service life of the coupling. The height of the inner gear ring will affect the expansion of the coupling, so the height of the inner gear will be thickened and heightened by the general designer. Thus, one side of the inner gear will be high, one side of the inner gear will be low, while the outer gear will not change. In this way, the designer can play a higher role in the coupling, but this will bring the operator unchanged.

HBE联轴器中国代理商山东望舒国际贸易有限公司为您提供HBE联轴器 HBE SOFTEX联轴器 HBE SOFTEX-ES联轴器 STAREX联轴器的选型、价格、样本、参数、图片、规格查询及订购业务

      能满足所有工业生产的需要，包括标准减速机、齿轮马达、蜗轮蜗杆减速机、重型减速机、工业应用型产品、风力发电产品、联轴器、齿轮及其它零部件等。我们的员工会以专业和积极的态度热情地帮助您。HBEHBEHBE被工业自动化与驱动技术集团收购，原HBE机电传动（天津）有限公司更名为机械传动（天津）有限公司，公司坐落在北辰高科技产业园区内，成为工业自动化与驱动技术集团在中国的运营公司。同时也提供相应的租赁服务。的产品在100多个和几乎所有行业得到应用。并以优异的产品质量，良好的信誉得到广大用户的好评。我们已经与许多厂家建立了长期的的友好的战略合作关系。如果您需要技术咨询或其他服务，只要通过我们的、传真或电子邮件中的任何一种方式。

  It works very well. Although the electric heating method is a better heating method, its use in the installation site is limited due to the need for special equipment, but the inductive heating method can still be considered. Induction heating method is adopted for large and medium coupling in installation site, which is based on the induction coil working frequency (50Hz), low voltage and high current. Under the same conditions and the same material.